💥Brake exhaust hose - One-way check valve pipe exhaust tool kit for car motorcycle clutch
💥Brake exhaust hose - One-way check valve pipe exhaust tool kit for car motorcycle clutch
Couldn't load pickup availability
Material: Aluminum housing to resist corrosion from brake fluid, with soft tube for easy release or loosening
One-way check valve：Prevents air from being drawn into the system
Easy to connect：Simple and easy to connect with the clips of your car's motorcycle clutch for venting.
Easy to bleed: Bleed car motorcycle brake fluid quickly with this brake bleeder hose.
Note: This car motorcycle brake bleeding kit looks simple but really a good helper to get the brake fluid out.
Step 1: Open
1. Open the brake bleed nipple on the brake caliper
Step 2: Connect the hose
1. Place one end of the hose on the vent nipple and secure it with the hose clamp (recommended only).
2. Notice: Please refer to the picture, and pay attention to the direction of the one-way valve, as there is a mark on the aluminum housing showing the flow direction of the brake fluid, the direction of the arrow on the valve should be away from the caliper
Step 3: Release and start pressing the brake lever
3.1 Loosen the brake bleeding screw slightly
3.2 Start pressing the brake lever SLOWLY
3.3 Check until all air bubbles are flushed out
3.4 Check that the fluid level in the master cylinder reservoir is not too low and refill
3. The package also contains 2 screw caps for brake bleeding
🎁THE PACKAGE CONTAINS
- 1 x 💥Brake exhaust hose
